首 页 关于我们 过程控制自动化 仪器仪表 液压控制 传感器及编码器 联系我们 English
地址︰深圳市福田區福強路32號2棟6F室
電話︰+86-755-83841930
   +86-755-83841939
傳真︰+86-755-83841895
電郵︰marke@sz-victory.com.cn
液压控制  
 
Jasta蝶阀 Jasta蝶阀
   
 
 
General

The JASTA special isolating and shut-off
damper with double-eccentric-bearing valve
disk can be used both as a shut-off or
isolating element (Leakage Rate 2 as per
DIN 3230) and also as a throttling and/or
control element in Pressure Level
PN 6/10/16/25 piping systems for liquid and
gaseous fluids. It guarantees perfect sealing
even under difficult operating conditions;
Type AB 28 can be used up to 280 °C,
Type AB 54 up to 540 °C operating
temperature. The stainless steel valve disk
features an uninterrupted endless sealing
surface outside the spindle gland which
comes into contact with the sealing element
in the damper body only in the final phase of
the closing movement during closure of the
JASTA special isolating and shut-off damper.
The JASTA special isolating and shut-off
damper possesses all the advantageous
design features of an isolating and shut-off
damper with double-eccentric-bearing valve
disk which have proven their worth under
practical operating conditions in a large and
diverse range of applications.

Enhancement of sealing efficiency can be

achieved merely by further movement of the
valve disk into the sealing element.
The sealing element is not subject to erosive

wear, since the angle of flow approach of the
constrictions necessary for design reasons
has been selected in such a way that
extraneous matter carried in the fluid is routed
past the sealing surface when the fluid is in
flow (dead angle)
When the JASTA special isolating and
shut-off damper is opened, the valve disk
detaches from the deformable sealing
element after only a short pivoting movement,
restricting undesirable abrasion and
destructive flexing of the sealing element
to a permissible minimum.
Renewal (changing) of the sealing element
can even be performed by less skilled staff.
Complete dismantling is not necessary.
The sealing surfaces on the valve disk and
the sealing element are not interrupted at or
around the spindle gland
Further movement of the valve disk into the

sealing element can be made possible by
means of slight adjustment of the "CLOSED"
position stop screw if, contrary to
expectation, impermissible leakage should
become apparent in the closure after a
prolonged period of operation. The
kinematics of this design principle guarantees
improvement of sealing even using this
method alone.

Actuation modes:

Manual:

Infinitely adjustable fine positioning

(RDST-32) (heavy-duty type)
Locking by means of clamping of the
adjusting lever

Worm-gear actuation systems

Handwheels (chain-wheels)

Motor operation:

electrically operated control and
positioning systems
for all voltages, including those with
spring-operated return systems

Pneumatically operated rotary

actuator systems and rams
double and single-action

Hydraulically operated actuator

systems

also suitable for flameproof designs,

suitable accessories:
End-position switches, proximity initiators,
positioning actuators, position transducers

Please state operating pressure, fluid,

operating temperature, differential pressure,
DN and PN when ordering

 

 

 

Fulflo安全阀
Jasta蝶阀
  技术概论
  技术概论
  产品类别
Jasta蝶阀
  典型应用
  典型应用说明书
YAMADA泵
SUN
VERSA
FORMSPRAG
STEARNS
 
Copyright © 2013 深圳市申克工业设备有限公司 版权所有 All Rights Reserved 粤ICP备08009706号