• Board for general use
• 16 protected isochronous analog inputs at ± 40V VIN = +/- 10VFS (G = 1)
• 32 inputs/outputs TTL (2 groups of 16 bits)
• 8 analog outputs ±10V FS DACs 14 bits
• ADCs 16 bits 200Ks/s/channel
• Selectable gains by software on each analog inputs G = 1 ; 2 ; 5 ; 10
• 15 decimation reports with anti-aliasing protection
• Numerical filter selectable by channel
• High accuracy and weak drift (2 x 10^-5)
• IRIG B input or TRIGGER for datation (Master / Slave)
• PLL (Phase Locked Loop) for 1µs resolution dating
• Multi-boards synchro
• FLIP-FLOP memory on the board
  (2 x 256Ksample.)
• 8 selectable break sources
• PCI Master / Slave (bus exchange)
• Many interface terminal block
• Drivers for Windows NT, XP and Linux 2.6 supplied and supported
  
  

PCI 160 board enables the simultaneous and isochronous acquisition of 16 analogs differential inputs as 32 TTL inputs / outputs (by two groups of 16 bits).
Each analog inputs features:

• an instrumentation amplifier with selectable gain by software (1, 2, 5, 10)
  (protection ± 40V)
• a 16 bits ADC which max speed is 200Ksample./s.
• a selectable numerical filter at 128 samples

We also can find 8 analog outputs with a resolution of 14 bits (±10V FS).
PLL (Phase Locked Loop) with IRIG B synchro for 1µs resolution dating.
PCI 160 features:

• a descriptor table measures 2Kwords
• a double access RAM in FLIP-FLOP of 2 x 256Kwords
• 8 selectable break sources with anti-bounce filtering

The board can be Master or Slave on the PCI to guarantee high transfer rates in realtime environment.